BZ Solids Control desanders are sent to the project site BZ Solids Control desander will soon be sent to a domestic project site. The drilling fluid desander produced by BZ Solids Control will be sent to the domestic project site after strict production, assembly, quality inspection and testing. Spraying requirements The solids control equipment manufactured by BZ Solids Control has been polished, sandblasted, epoxy zinc-rich primer, epoxy mica medium paint, polyurethane topcoat, and high-pressure airless spraying equipment is used for construction, which greatly improves the product itself. The surface’s wear-resisting and anti-corrosion and appearance effect. BZ drilling fluid desander ordered by the customer this time has a processing capacity of 240 cubic meters, and the model is: BZCS250-2S. The basic principle of the drilling fluid desander manufactured by BZ Solids Control is to use centrifugal force to introduce fluid in a tangential direction to the desander. In the conical shell of the sand cyclone, the action of gravity pushes the solid particles to the surface of the cone and runs down to the separation outlet of the separator. The swirling effect of the secondary liquid generated in the separator shell causes the liquid to move upward and is discharged from the overflow outlet through the swirl detector. The smaller the diameter of the desander cyclone, the greater the separation effect, which can successfully separate the solid particles with small diameters. The equipment used for sand discharge at the oil field drilling site is often eroded, resulting in the deposition of solid particles and the blockage of pipelines. To solve this problem, BZ Solids Control has developed a solid/liquid cyclone desander device that can be used to separate and eliminate solid particles in well fluids. Compared with the traditional filter desander device, the BZCS250-2S cyclone desander manufactured by BZ Solids Control has a compact structure and high working efficiency. It can remove the oil sample adhering to the surface of solid particles and remove the sand by swirling. In the process of producing high gravity, the shearing force field will also be generated. The drilling mud solids control equipment developed and manufactured by BZ Solids Control has been successfully used in oil, natural gas extraction, horizontal directional crossing, coalbed methane drilling mud, shield mud-water separation, oily sludge reduction treatment and many other projects. The customer’s demand is The only goal of BZ Solids Control is to welcome customers to inquire.
